Do not leave the loadedtool or the air com- pressor under pressure for a long time out in the sun. Be sure that dust, sand, chips and foreign matter will not enter the tool in the place where you leave It setting.
Do not point the ejection port at anyone in the vicinity. Keep hands and feet away from the ejection port area.
*When the air hose is connected, do not carry the tool with your finger on the trigger or hand it to someone In this condition. Accidental firing can be extremely dan- gerous.
Handle the tool carefully as there is high pressure inside the tool that can be danger- ous if a crack Is caused by rough handling (dropping or striking). Do not attempt to carve or engrave on the tool.
8
