Makita BHR202 specifications Retaining ring S-7

P 10 / 13

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-8. Swash Bearing Section (cont.)

DISASSEMBLING

11) Remove Helical gear 26 using 1R022, 1R023 and 1R281.

as illustrated to left in Fig. 37. Swash bearing 10 and Clutch cam can now be removed by hand (right in Fig. 37).

12)Remove Retaining ring S-7 using 1R291 (left in Fig. 38). Compression spring 7 and Spur gear 10 can now be removed by hand. (right in Fig. 38).

Fig. 37 Fig. 38

1R281	Swash
	bearing 10
1R022
Helical gear 26	Clutch cam

1R023

ASSEMBLING

Retaining ring S-7

1R291

Cam shaft

Spur gear 10

Compression spring 7

1) Assemble Swash bearing section using 1R032, 1R033, 1R291 and arbor press as illustrated in Fig. 39.

Note: Be sure to put Flat washer 8 in place, or else Bearing retainer will be clamped between Ball bearing 608ZZ and Helical gear 26.

Fig. 39

Cam shaft

Clutch cam

Swash	Helical gear 26
bearing 10

1R032 1R033

Flat washer 8

Bearing retainer

Ball bearing 608ZZ

Retaining ring S-7

Compression spring 7

Spur gear 10

Cam shaft

Ring 8