Makita BO5021, BO5020 Installing paper dust bag Installing dust bag, Emptying dust bag

pad, using the hook-and-loop system of the abrasive disc and the pad. Be careful to align the holes in the abrasive disc with those in the pad.

Installing paper dust bag

Installing dust bag

2

1

1. Groove

2. Front fixing

cardboard

1

1.Push button

2.Dust nozzle

3

003742

3. Front side of

paper dust bag

2

003322

Place the paper dust bag on the paper dust bag holder with its front side upward. Insert the front fixing cardboard of the paper dust bag into the groove of the paper dust

Install the dust bag on the tool so that the arrow with "UP" indicated on the dust nozzle points upward.

bag holder.

Then press the upper part of the front fixing cardboard in

Emptying dust bag

1

2

1.Dust nozzle

2.Push button

arrow direction to hook it onto the claws.

1	1.	Claws
	2.	Upper part
	2

003324

003743

Insert the notch of the paper dust bag into the guide of

1 2

3 4

003325

1.Hook

2.Dust nozzle

3.Push button

4.Dust bag

the paper dust bag holder. Then install the paper dust bag holder set on the tool.

1. Notch

2. Guide

2

1

When the dust bag is about half full, switch off and unplug the tool. Hold the tool and remove the dust bag from the dust nozzle while pressing the push button.

After emptying the dust bag, insert the hook on the dust nozzle into the rectangular hole on one side of the dust bag frame and push up the dust bag frame until it clicks into place on the push button.

003327

003744

003745

6