around you.
•Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly.
Switch action
Lighting up the lamp
1. Lamp
1
B
A
2
007147
CAUTION:
1.
2.Switch trigger
1
007149
CAUTION:
•Do not apply impact to the lamp, which may cause damage or shorted service time to it.
Pull the switch trigger to light up the lamp. The lamp keeps on lighting while the switch trigger is being pulled.
•Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position
when released.
To prevent the switch trigger from accidentally pulled, the
To start the tool, depress the
Release the switch trigger to stop. After use, always press in the
Speed adjusting dial
| 1. Speed adjusting |
1 | dial |
007148
The tool speed can be infinitely adjusted between 1.4 m/s (275 ft./min.) and 2.7 m/s (530 ft./min.) by turning the adjusting dial. Higher speed is obtained when the dial is turned in the direction of number 6; lower speed is obtained when it is turned in the direction of number 1.
Select the proper speed for the workpiece to be cut.
CAUTION:
•The speed adjusting dial can be turned only as far as 6 and back to 1. Do not force it past 6 or 1, or the speed adjusting function may no longer work.
The lamp goes out 10
NOTE:
•Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination.
•Do not use thinner or gasoline to clean the lamp. Such solvents may damage it.
Battery protection system
The tool is equipped with the protection system, which automatically cuts off the output power for a long service life of the battery cartridge.
When the tool is overloaded or the remaining battery capacity gets low, the lamp flickers. Within one second after flickering, the tool stops.
If the tool stops under no or light load, recharge or replace the battery cartridge.
Hook
1. Hook
1
007300
The tool may be hung using the hook. Hang tool on a pipe vice or other suitable, stable structure.
5
