Makita BUH550/ BUH650 Repair 3 DISASSEMBLY/ASSEMBLY, Shear Blade Assembly, Gear Complete cont

P 3/ 9

Repair

[3] DISASSEMBLY/ASSEMBLY

[3]-1. Shear Blade Assembly, Gear Complete (cont.)

DISASSEMBLING

Fig. 3

3.Loosen two M5x25 Pan head screws and separate Shear blade assembly from the machine. Note: The screws remain in the holes of Shear blade assembly to hold Sleeves 5 in the blade,

if the same blade is reassembled to the machine.

M5x25 Pan head screws (2pcs.) with Sleeves 5 in the holes

Shear blade assembly

M5x25 Pan head screws (2pcs.)

with Sleeves 5 in the holes

(2)Disassemble Gear complete. (Fig.4)

Fig. 4

4.Remove Gear complete by tapping the specific part of Gear housing complete with plastic hammer as drawn below.

5.Remove 2 pcs. of Ball bearing 608ZZ from the both sides of Gear complete.

1R269

6.Remove 2 pcs. of Flat washer 8 from the both sides of Gear complete.

Flat washer 8

Ball bearing 608ZZ

Crank side Reverse side