ENGLISH (Original instructions)
Explanation of general view
1. | Button | 5. | Reversing switch lever | 9. | Pointer |
2. | Battery cartridge | 6. | Speed change lever | 10. | Bit |
3. | Switch trigger | 7. | Adjusting ring | 11. | Sleeve |
4. | Lamp | 8. | Graduation | 12. | |
|
|
|
|
|
|
SPECIFICATIONS
Model |
| DF030D | |
|
| Steel | 10 mm |
Capacities |
| Wood | 21 mm |
| Wood screw | 5.1 mm x 63 mm | |
|
| ||
|
| Machine screw | M6 |
No load speed |
| High (2) | 0 - 1,300 |
| Low (1) | 0 - 350 | |
|
| ||
Chuck capcity |
| 6.35 mm | |
Overall length |
| 157 mm | |
Net weight |
| 0.89 kg | |
Rated voltage |
| D.C. 10.8 V | |
•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
•Specifications may differ from country to country.
•Weight, with battery cartridge, according to
Intended use |
The tool is intended for drilling and screw driving in wood, metal and plastic.
General Power Tool Safety
WarningsGEA010-1
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
5.Keep hands away from rotating parts.
6.Do not leave the tool running. Operate the tool only when
7.Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin.
8.Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
SPECIFIC SAFETY RULES GEB001-4
DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to drill safety rules. If you use this power tool unsafely or incorrectly, you can suffer serious personal injury.
1.Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
2.Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
3.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
4.Hold the tool firmly.
4
IMPORTANT SAFETY
INSTRUCTIONSENC007-4
FOR BATTERY CARTRIDGE
1.Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery.
2.Do not disassemble battery cartridge.
3.If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion.
4.If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight.
