Makita DP4003, DP4002, DP3003, DP4001, DP4000, DP3002, 3006 instruction manual Specifications, Symbols

ENGLISH (Original instructions)

SPECIFICATIONS

Model		DP3002		DP3003	DP4000		DP4001		DP4002		DP4003
Capacities	Steel		10 mm					13 mm
	Wood		32 mm					38 mm
No load speed (min-1)			0 - 1,200			0 - 950				0 - 700
Overall length		304 mm		296 mm	304 mm		308 mm		304 mm		308 mm
Net weight		2.4 kg		2.2 kg	2.5 kg		2.4 kg		2.7 kg		2.5 kg
Safety class							/II

•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

•Specifications may differ from country to country.

•Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and

electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.

ENE032-1

Intended use

The tool is intended for drilling in wood, metal and plastic.

ENF002-2

Power supply

The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated and can, therefore, also be used from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according to EN60745:

Model DP3003

Sound pressure level (LpA) : 81 dB(A)

Sound power level (LWA) : 92 dB(A)

Uncertainty (K) : 3 dB(A)

Model DP4001,DP4002,DP4003

Sound pressure level (LpA) : 82 dB(A)

Sound power level (LWA) : 93 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined according to EN60745:

Model DP3003,DP4001,DP4002,DP4003

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

•The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.

•The declared vibration emission value may also be used in a preliminary assessment of exposure.

WARNING:

•The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.

•Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).

2