FUNCTIONAL DESCRIPTION
CAUTION:
•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
Switch action
Hook
1 | 1. Hook |
|
A
1
2
003020
CAUTION:
1.Switch trigger
2.Lock lever
003032
B
•Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then push the lock lever upward.
To stop the tool from the locked position, pull the switch trigger fully, then release it.
Reversing switch action
1 | 1. Reversing |
| switch lever |
003033
When using the hook, pull it out in "A" direction and then push it in "B" direction to secure in place.
When not using the hook, return it back to its initial position by following the above procedures in reverse.
ASSEMBLY
CAUTION:
•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.
Installing side grip (auxiliary handle)
A |
B
003027
This tool has a reversing switch to change the rotational
1
23
003040
1.Side grip
2.Teeth
3.Protrusions
direction. Move the reversing switch lever to the
position (A side) for clockwise (forward) rotation or the 
position (B side) for counterclockwise (reverse) rotation.
CAUTION:
•Always check the rotational direction before operation.
•Use the reversing switch only after the tool comes to a complete stop. It will damage the tool to change the rotational direction before the tool stops.
Always use the side grip to ensure operating safety. Install the side grip so that the teeth on the grip fit in between the protrusions on the tool barrel.
Then tighten the grip by turning clockwise at the desired position. It may be swung 360° so as to be secured at any position.
5
