Makita EW1OOR Checking Bolts, Nuts And Screws, Cleaning Fuel Strainer, Keep safety on your mind

Models: EW1OOR

1 17

Page 13

wLoosen the banjo bolt from the carburetor and remove the strainer (plastic mesh).

wClean the strainer with kerosene and reassemble it.

- 11 -

Image 13

Contents

MODEL EW1OOR PUMP7.MAINTENANCE SCHEDULE 1. PUMP SAFETY2.COMPONENTS 3.PREPARATIONS FOR STARTINGSURROUNDINGS EXHAUST PRECAUTIONFIRE PREVENTION OTHER IMPORTANT POINTS2.COMPONENTS 1.Connect the suction hose 3.PREPARATIONS FOR STARTING2.Connect the discharge hose 3.Check the fuel level+CAUTION 4.Check the prlmingwater1.Open the fuel cock 4.STARTING THE ENGINE2.Set the speed control lever to “START.” 3.Close the choke leverH After starting the engine, allow the H Do not pull out the rope all the way5.OPERATION 6.STOPPING THE ENGINE STOPPING ENGINE WITH THEFUEL COCK PERIODIC INSPECTION DAILY INSPECTIONCLEANING MUFFLER CLEANING AIR CLEANERFUEL PIPE REPLACEMENT INSPECTING THE SPARK PLUGCHECKING BOLTS, NUTS AND SCREWS CLEANING FUEL STRAINERKeep safety on your mind Retighten loose bolts and nutsPump does not self-prime Pump does not run Pumping volume is smallBefore testing, carefully wipe off spilled fuel WHEN ENGINE DOES NOT STARTsand or dust IO . PREPARATIONS FOR STORAGEMakita Corporation MAKITA LIMITED ONE YEAR WARRANTY3-18-8, Sumiyoshi-choAnjo, Aichi 446 Japan