Functional Description, Symbols, Assembly

8.	Always be sure you have a firm footing.
	Be sure no one is below when using the tool in
	high locations.
9.	Hold the tool firmly with both hands.
10.	Keep hands away from moving parts.
11.	Do not leave the tool running. Operate the tool
	only when hand-held.
12.	Do not point the tool at any one in the area
	when operating. The bit could fly out and

FUNCTIONAL DESCRIPTION

CAUTION:

•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.

	injure someone seriously.
13.	Do not touch the bit or parts close to the bit
	immediately after operation; they may be
	extremely hot and could burn your skin.
14.	Do not operate the tool at no-load
	unnecessarily.
15.	Some material contains chemicals which may
	be toxic. Take caution to prevent dust
	inhalation and skin contact. Follow material
	supplier safety data.

008704

CAUTION:

1.Lock button

2.Switch trigger

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product.

MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

USD203-2

The followings show the symbols used for tool.

･volts

･amperes

･hertz

･ alternating current

･ Class II Construction

･ revolutions or reciprocation per minute

･ number of blow

•Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.

To start the tool, simply pull the switch trigger. Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then push in the lock button.

To stop the tool from the locked position, pull the switch trigger fully, then release it.

CAUTION:

•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.

Install the casters securely with the bolts using the hex wrench.