replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual. Have defective switches replaced by authorized service center. Don't use tool if switch does not turn it on and off.
19.When drilling into walls, floors or whatever "live" electrical wires may be encoun- tered. DO NOT TOUCH THE CHUCK OR ANY FRONT METAL PARTS OF THE DRILL. Hold the Drill only by the plastic handle or the side grip t o prevent electric shock if you drill into a ''live'' wire.
20.GUARD AGAINST ELECTRIC SHOCK.
Prevent body contact with grounded surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.
21.REPLACEMENT PARTS. When servicing, use only identical replacement parts.
SAVE THESE INSTRUCTIONS.
VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified o n the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY t o the user - as well as damage t o the tool. If in doubt, DO NOT PLUG I N THE TOOL. Using a power source with voltage l e u than the nameplate rating is harmful t o the motor.
How to use
0 Drill Chuck
When installing a drill bit with the chuck key, notice that there are three holes in the chuck where the bit should be tightened, not just one. Tighten evenly at all three holes in order. (as you moved mount a tire.)
0 For Drilling Only (Rotation Alone)I For drilling in steel or wood, twist the indicator on top of the tool so that the
drilling indication
This provides drilling by itself. Use a con- ventional bit for drilling metal or wood.
Fig. 1
Diamond convex I
I
Fig. 2
3
