![](/images/new-backgrounds/1145512/1455125x1.webp)
P 3 /17
Repair
( 3) Disassembling gear section See Fig. 3.
1.Separate gear housing cover from gear housing.
2.Pull out lock plate.
3.Then change lever B, pin, rack 12 with change plate B and spur gear
Gear housing | Spur gear | |
Lock plate | ||
|
Gear housing cover
Change lever B | Pin |
Rack 12 | |
| Change plate B |
Fig. 3
( 4) Assembling gear section
1. Assemble the spindle section to gear housing as illustrated Fig. 4 below.
| Oil seal 19 | |||||||
Bearing retainer | Gear housing | |||||||
|
|
|
|
|
|
| Ring spring 11 | |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spindle section (including conical compression spring
Fig. 4
When assembling bearing retainer
refer to "( 6) Assembling bearing retainer
2. Insert change plate B into rack 12 as illustrated Fig. 5 right.
3. Set the above assembled one to spur gear
Rack 12
Change plate B
Fig. 5 |
Spur gear |
Fig. 6 |
4.Make sure that leaf spring is assembled in gear housing in advance. If not, assemble it. Assemble spur gear
and at the same time, assemble rack 12 w/ change to gear housing as illustrated in Fig. 7 right.
plate B
Gear housing | Leaf spring | Spur gear |
| ||
|
| |
Spindle | Rack 12 with change plate B | |
| ||
| Fig. 7 |
|