Makita HPR2410 FUNCTIONAL DESCRIPTION

FUNCTIONAL

DESCRIPTION CAUTION:

•Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

CAUTION:

•Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

To start the tool, simply pull the switch trigger. Tool speed is

increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

This tool has a reversing switch to change the direction of

rotation. Move the reversing switch lever to the position

(A side) for clockwise rotation or the position (B side) for

counterclockwise rotation.

CAUTION:

•Always check the direction of rotation before operation.

•Use the reversing switch only after the tool comes to a

complete stop. Changing the direction of rotation before

the tool stops may damage the tool.

This tool employs an action mode changing knob. Select one

of the two modes suitable for your work needs by using this

knob.

For rotation only, turn the knob so that the arrow on the knob

points toward the mark on the tool body.

For rotation with hammering, turn the knob so that the arrow

on the knob points toward the mark on the tool body.

CAUTION:

•Always set the knob fully to your desired mode mark. If

you operate the tool with the knob positioned halfway

between the mode marks, the tool may be damaged.

1. Switch trigger

003107

1. Reversing switch lever

2. Switch trigger

003115

1. Action mode changing knob

003124