Depth rod
.The depth rod i s used to drill holes of uniform depth. Loosen the thumb screw set the depth rod to desired position, then tighten the thumb screw.
Handlingdust collector
0 Use the dust collector for safe, sanitary overhead operations. Install the drill bit,
then fix the dust collector on the end by turning and applying pressure. Then secure it by turning the metal retainer clockwise.
CAUTION:
Empty the dust collector of i t s contents after drilling every 2 or 3 holes.
How to work switchover mechanism
0 For Rotation + Hammering:
Press the push rod indCDodirection.
For Rotation only:
Press the Dush rod in &+direction.
Lb-
CAUTION:
Press the push rod as far as it will go. Failure to do so can cause rapid wear of the switchover mechanism.
Fig. 4
Dust collector
Fig. !
Push rod
Fig. 7
