ENGLISH
Explanation of general view
1 | Switch trigger | 9 | Tighten | 17 | Hole of grip base |
2 | Lock button | 10 | Teeth | 18 | Dust cup |
3 | Lamp | 11 | Protrusion | 19 | |
4 | Reversing switch | 12 | Bit shank | 20 | Keyless drill chuck |
5 | Action mode changing knob | 13 | Bit grease | 21 | Chuck adapter |
6 | Grip base | 14 | Bit | 22 | Sleeve |
7 | Side grip | 15 | Chuck cover | 23 | Ring |
8 | Loosen | 16 | Depth gauge |
|
|
SPECIFICATIONS
Model | HR1830/HR1830F |
Capacities |
|
Concrete | 18 mm |
Core bit | 35 mm |
Diamond core bit (dry type) | 65 mm |
Steel | 13 mm |
Wood | 24 mm |
No load speed | 0 – 1,500 |
Blows per minute | 0 – 5,000 |
Overall length | 279 mm |
Net weight | 1.7 kg |
Safety class | /II |
•Due to our continuing program of research and devel- opment, the specifications herein are subject to change without notice.
•Note: Specifications may differ from country to country.
Intended use
The tool is intended for hammer drilling and drilling in brick, concrete and stone.
It is also suitable for drilling without impact in wood, metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on
Safety hints
For your own safety, please refer to the enclosed safety instructions.
SPECIFIC SAFETY RULES
DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to rotary hammer safety rules. If you use this tool unsafely or incorrectly, you can suffer serious per- sonal injury.
1.Wear ear protectors. Exposure to noise can cause hearing loss.
2.Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
3.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
4.Wear a hard hat (safety helmet), safety glasses and/or face shield. Ordinary eye or sun glasses are NOT safety glasses. It is also highly recom- mended that you wear a dust mask and thickly padded gloves.
5.Be sure the bit is secured in place before opera- tion.
6.Under normal operation, the tool is designed to produce vibration. The screws can come loose easily, causing a breakdown or accident. Check tightness of screws carefully before operation.
7.In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load. This will loosen up the lubrication. Without proper warm- up, hammering operation is difficult.
8.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
9.Hold the tool firmly with both hands.
10.Keep hands away from moving parts.
11.Do not leave the tool running. Operate the tool only when
12.Do not point the tool at any one in the area when operating. The bit could fly out and injure some- one seriously.
13.Do not touch the bit or parts close to the bit immediately after operation; they may be extremely hot and could burn your skin.
14.Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
4
