Makita HR2600, HR2601 [3]-1. Bit holder section

Repair

P 5/ 13

[3] DISASSEMBLY/ASSEMBLY

[3]-1. Bit holder section

Chuck cover

Groove of

Tool holder

complete

DISASSEMBLING

(1) Remove Cap 35.

(2) Separate Ring spring 14 from the groove of Tool holder complete using

1R003 with 1R212. (Fig. 2)

Washer 16 on Ring spring 15 is removed.

(3) Remove Ring spring 15 in the same way while pressing down Chuck cover.

(Fig. 3) Then pick up Flat washer 17 and Rubber washer 16 from the space

between Chuck cover and Tool holder complete.

Chuck cover is removed.

(4) Remove two Steel balls 7.0 while pressing down Ring 21. (Fig. 4)

Ring 21, Guide washer and Conical compression spring 21-29 are removed.

Fig. 2

Fig. 3

Fig. 5

Fig. 4

ASSEMBLING

Assemble in the reverse order of disassembly. Refer to Fig. 5 for the directions of the components.

Cap 35

Ring spring 14

(black)

Ring spring 15

(silver)

Flat washer 17

1R003

1R212

Ring 21

Guide washer

Conical compression

spring 21-29

Steel ball 7.0

(2 pcs.)

Chuck coverCap 35 Tool holder

complete

Ring spring 14

(black)

Ring spring 15

(silver)

Ring 21 Guide washerWasher 16

chamfered

portion

Conical compression

spring 21-29

chamfered

portion

concave

side

Steel ball

7.0 (2 pcs.)

Flat washer 17 Rubber

washer 16

convex

side

flat side