Specifications, Symbols | Makita HR3000C specification

ENGLISH (Original instructions)

SPECIFICATIONS

	Model		HR3000C
		Concrete	30 mm
Capacities		Core bit	90 mm
Capacities		Steel	13 mm
		Steel	13 mm
		Wood	30 mm
	No load speed (min-1)		360 - 720
	Blows per minute		1,650 - 3,300
	Overall length		391 mm
	Net weight		5.1 kg
	Safety class		/II

•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

•Specifications may differ from country to country.

•Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and

electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.

ENE043-1

Intended use

The tool is intended for hammer drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic.

ENF002-1

Power supply

The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according to EN60745:

Sound pressure level (LpA) : 89 dB(A)

Sound power level (LWA) : 100 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined according to EN60745:

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 18.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiseling

Vibration emission (ah,CHeq) : 11.0 m/s2

Uncertainty (K) : 2.0 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

•The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.

•The declared vibration emission value may also be used in a preliminary assessment of exposure.

WARNING:

•The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is

HR3000C specifications

The Makita HR3000C is a powerful and versatile rotary hammer designed for heavy-duty applications in the construction and renovation sectors. Known for its robust performance, the HR3000C features a 3-mode operation: hammering only, hammering with rotation, and rotation only. This functionality makes it suitable for a wide range of tasks including drilling into concrete, masonry, and heavy materials, as well as for chiseling and demolition work.

One of the standout features of the HR3000C is its impressive motor, delivering 800 watts of power. This ensures high performance even in tougher applications, enabling users to tackle demanding projects without worrying about overheating or diminished performance. The hammering rate of the HR3000C is up to 4,600 BPM, allowing for fast penetration into hard surfaces, thus enhancing productivity on job sites.

The HR3000C is equipped with a user-friendly design that focuses on comfort and control. It comes with a rubberized grip handle that reduces vibrations, making it easier to handle during extended use. The side handle can be adjusted to provide additional leverage and stability, ensuring that users can maintain precision and control regardless of the angle or position of the tool.

In terms of durability, the HR3000C is built with high-quality materials that withstand rigorous use. Its housing is designed to resist impact and wear, while the internal components are engineered to tolerate tough drilling conditions. Additionally, Makita incorporates technologies that enhance the lifespan of the tool, such as a dust-proof design that protects the internal workings from debris and dust.

The tool accepts SDS-Plus shank bits, providing versatility when it comes to bit selection. This compatibility allows users to easily switch between various bit sizes and types, further enhancing the HR3000C's adaptability to different tasks.

Another notable aspect is the quick-release chuck mechanism, which allows for swift and easy bit changes without the need for additional tools. This feature not only saves valuable time but also minimizes downtime between tasks.

In summary, the Makita HR3000C rotary hammer is an essential tool for professionals seeking reliable performance, comfort, and durability. With its multiple modes of operation, robust power, and user-centric design, it is well-equipped to handle a variety of demanding applications in construction and renovation. Whether users are drilling, chiseling, or performing heavy-duty demolition work, the HR3000C remains a dependable choice in the Makita lineup.

Makita HR3000C instruction manual Specifications, Symbols

Models: HR3000C