FUNCTIONAL DESCRIPTION
Selecting action mode
Rotationwith hammering
For drilling in concrete, masonry, etc., depress the lock button and rotate the change lever so that the pointer points to
the symbol. Use a tungsten carbide- tipped bit.
Jy E 1
Pointer
Hammeringonly
For chipping, scaling or demolition operations, depress the lock button and rotate the
change lever so that the pointer points to the symbol. Use a bull point, cold chisel, scaling chisel, etc.
Change lever 1 rPoin
II
CAUTION:
Do not rotate the change lever when the tool is running under load. The tool will be dam- aged.
*To avoid rapid wear on the mode change mechanism, be sure that the change lever is always positively located in one of the two action mode positions.
The bit can be secured at 16 different angles. To change the bit angle, depress the lock button and rotate the change lever so that the pointer points to the o symbol. Turn the bit to the desired angle.
Lock button
Change lever
?ea
Pointer
6
