Specific Safety Rules
1.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2.Be aware that this tool is always in an operating condition, because it does not have t o be plugged into an electrical outlet.
3.Avoid cutting nails. Inspect workpiece for any nails and remove them before operation.
4.Do not cut oversize workpiece.
5.Check for the proper clearance beyond the workpiece before cutting so that the blade will not strike the floor, workbench, etc.
6.Hold the tool firmly.
7.Make sure the blade is not contacting the workpiece before the switch is turned on.
8.Keep hands away from moving parts.
9.Always switch off and wait for the blade t o come to a complete stop before removing the blade from the workpiece.
IO.Do not touch the blade or the workpiece immediately after operation; they may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
4
