Lubrication

Before operation, lubricate the contact point of the center blade and the pin. To keep good cutting performance, also use a cutting lubricant from time to time during operation.

Switch action

 

To start the tool, move the slide switch

 

forward, and the slide switch will lock in

Slide switch

the "ON" position. To stop, lightly depress

1

the rear of the slide switch, and it will re-

 

turn to the "OFF" position.

 

CAUTION :

 

Before plugging in the tool, always check

 

to see that the slide switch actuates pro-

 

perly and returns to the "OFF" position

 

when depressed.

 

Operation

 

Turn the tool on and s e t the front ends

 

of the side blades on the workpiece. Now

 

simply move the tool forward, keeping

 

the side blades flush with the workpiece

 

surface. When cutting curves, advance the

 

tool very slowly.

 

CAUTION :

 

When cutting a small portion of the work-

 

piece, you may have difficulty complet-

 

ing the end of the cut. In that case, try to

 

cut it again, pulling the workpiece back

 

slightly.

 

5

Page 5
Image 5
Makita JS1670 instruction manual Lubrication