Makita ML702 For USA only Recycling the Battery, Operating Instructions, To recycle the battery

Ni-Cd

For USA only

Recycling the Battery

The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal.

To recycle the battery:

1. Remove the battery from the tool.

2. a). Take the battery to your nearest Makita Factory Service Center or

b). Take the battery to your nearest Makita Authorized Service Center or Distributor that has been designated as a Makita battery recycling location.

·Call your nearest Makita Service Center or Distributor to determine the location that provides Makita battery recycling. See your local Yellow Pages under ``Tools-Electric''.

OPERATING INSTRUCTIONS

Charging

For ML702 (Fig. 1), ML902 (Fig. 1) and ML901 (Fig. 2)

Charge the battery cartridge with the Makita charger before use. To remove the battery cartridge, pull out the set plate on the torch/flashlight and grasp both sides of the cartridge while withdrawing it from the torch/flashlight. After charging, insert the battery cartridge into the torch/flashlight and snap the set plate back into place.

For ML903 (Fig. 3)

Charge the battery cartridge with the Makita charger before use. To remove the battery cartridge, withdraw it from the torch/flashlight while pressing the buttons on both sides of the cartridge. After charging, insert the battery cartridge into the torch/flashlight all the way until it locks in place with a little click.

NOTE:

Battery cartridge 9100, 9102, 9100A and 9102A can be used on ML903 if you install the set plate. Install the set plate on ML903 with the screw provided as shown in Fig. 4.

The following tables indicate the charging time and operating time on a single charge.

ML702

Voltage	Battery cartridge	Operating time	Charger
			DC7100, DC9710, DC9711,
	7000	Approx. 140 min.	DC1201, DC1411, DC1439,
			DC1470, DC1422, DC1801
7.2 V	7002	Approx. 210 min.	DC9711, DC1201, DC1411,
			DC1439, DC1422, DC1801
	7033	Approx. 240 min.	DC9711, DC1411, DC1439,
			DC1422, DC1801

ML901/ML903

Voltage	Battery cartridge	Operating time	Charger
			DC9710, DC9711, DC1201,
	9100, 9100A, 9120	Approx. 160 min.	DC1411, DC1439, DC1470,
			DC1422, DC1801
9.6 V	9102, 9102A, 9122	Approx. 230 min.	DC9711, DC1201, DC1411,
			DC1439, DC1422, DC1801
	9133	Approx. 260 min.	DC9711, DC1411, DC1439,
	9134	Approx. 310 min.
			DC1422, DC1801
	9135, 9135A	Approx. 360 min.

(Note)

If you use a power checking battery on Model ML901/ML903, the power checking battery will not indicate the remaining battery capacity properly.

5