ML902
Voltage | Battery cartridge | Operating time | Charger |
|
|
| DC9710, DC9711, DC1201, |
| 9000 | Approx. 160 min. | DC1411, DC1439, DC1470, |
|
|
| DC1422, DC1801 |
9.6 V | 9002 | Approx. 230 min. | DC9711, DC1201, DC1411, |
| DC1439, DC1422, DC1801 | ||
|
|
| |
| 9033 | Approx. 260 min. | DC9711, DC1411, DC1439, |
| DC1422, DC1801 | ||
|
|
|
Storing battery cartridge
Always charge the Nickel Metal Hydride battery cartridge before storing it when you do not use it for more than six months.
MAINTENANCE
To maintain product safety and reliability, repairs, main- tenance or adjustment should be carried out by a Makita Authorized Service Center.
Head angle (Fig. 5)
The head angle can be adjusted in four stages. Adjust as desired.
Replacing bulb (Fig. 6 & 7)
CAUTION:
The bulb is very hot immediately after operation. Wait until the bulb cools off before attempting to replace it.
First, turn the ring counterclockwise and remove the reflector. Remove the bulb holder by turning it coun- terclockwise. Then replace the bulb.
Shoulder strap (Fig. 8)
Install the strap on the tool.
ACCESSORIES
CAUTION:
These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The acces- sories or attachments should be used only in the proper and intended manner.
·Bulb set (2 pcs)
·Shoulder strap
·Set plate (For Model ML903)
6
