2
SPECIFICATIONS

• Manufacturer reserves the right to change specifications without notice.

• Specifications may differ from country to country.

GENERAL SAFETY RULES USA001-2

(For All Tools)

WARNING:

Read and understand all instructions. Failure to follow all

instructions listed below, may result in electric shock, fire and/or

serious personal injury.

SAVE THESE INSTRUCTIONS

Work Are a

1. Keep your work area clean and well lit.
Clutteredbenches and dark areas invite acci-
dents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
toolscreate sparks which may ignite the dust
orfumes.
3. Keep bystanders, children, and visitors
awaywhile operating a power tool. Distrac-
tionscan cause you to lose control.

Electrical Safety

4. Grounded tools must be plugged into an
outlet properly installed and groundedin
accordance with all codes and ordi-
nances. Never remove the grounding
prong or modify the plug in any way.Do
not use any adaptor plugs. Check with a
qualified electricianif you are in doubt as
to whether the outlet is properly
grounded.If the tools should electrically mal-
functionor break down, grounding provides a
low resistance path to carry electricity away
fromthe user.
Model GA7911
Noload speed (RPM) 6,000/min
Overalllength 412 mm (16-1/4”)
Netweig ht 5.5kg (12. 1 lbs)
Spindlethread 5/8”