-Unpacking-and Checking Contents
TOOLS NEEDED FOR ASSEMBLY
COMBINATION SQUARE MUST BE TRUE
|
|
| Straight E- | d BoWd | |
Medium Screwdriver | Phillips Screwdriver | Draw Light Line On | W4" mi,This E* Mu.( | ||
k PertuAy S t n m t . | |||||
|
| BoardAlong This Edge | |||
|
|
| I | ||
Combination square | 10 mm Wrench | LJ. |
Should Be No'GapOr Overlap
Here When Square Is Flipped
Over In Dotted Position
WARNING: To avoid injury from unexpected start- ing or electrical shock, do not plug the saw in until all assembly and alignment steps are complete. The power cord must remain unplugged whenever you are working on the saw.
Hose
The Scroll Saw is shipped complete in one carton. Separate all parts from packing materials and check each item with illustration and 'Table of Loose Parts". Make certain all items are accounted for, before discarding any packing material.
NOTE: Insert the hose to air diaphragm before starting.
assemble the scroll saw, plug in the power cord or turn the switch on until the missing parts are obtained and installed correctlv.
- -
In111
TABLE OF LOOSE PARTS | QTY |
Basic saw assembly | 1 |
Owners Manual | 1 |
Loose Parts Bag |
|
Containing the following parts: |
|
Blade Change Rod | 1 |
Hex Wrench "L" | 1 |
Saw blade | 6 |
5
