6.The proper fastening torque may differ depending upon the kind or size of the bolt. Check the torque with a torque wrench.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence
FUNCTIONAL DESCRIPTION
CAUTION:
•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
Switch action
to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
Symbols
The followings show the symbols used for tool.
･ | volts |
･ | amperes |
1
004006
CAUTION:
1. Switch trigger
･ hertz |
･ alternating current
･no load speed
･ Class II Construction
･ revolutions or reciprocation per minute
･ number of blow
•Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.
•Change the direction of rotation only when the tool comes to a complete stop. Changing it before the tool stops may damage the tool.
The switch is reversible, providing either clockwise or counterclockwise rotation. To start the tool, simply pull the lower part of the switch trigger for clockwise or the upper part for counterclockwise. Release the switch trigger to stop.
ASSEMBLY
CAUTION:
•Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.
Selecting correct socket
Always use the correct size socket for bolts and nuts. An incorrect size socket will result in inaccurate and inconsistent fastening torque and/or damage to the bolt or nut.
Installing or removing socket
For tool with light fit detent pin
2 | 1 |
|
| 1. | Socket |
| 2 |
| 2. Anvil | ||
|
|
| |||
|
| 3 | 3. | Hole | |
|
|
| |||
4 |
|
| 4 | 4. | Detent pin |
|
|
|
| ||
007323
4
