Charging
Connect the battery to the charger using the adaptor cord. Then plug the charger into the power source. The charging light will illuminate and charging will begin. When the charg- ing light goes out a t a certain time, the charging is complete. Unplug the charger.
(Note: Refer to the table below for the charging time.)
122
I 121
- i |
DC122
Approx. 1 hour
I Approx. 2 hours
Outi et
I
DC121
Approx. 2 hours
Approx. 4 hours
I
I
CAUTION:
Always charge the Makita battery 122 immediately after purchase. 0 Always recharge the Makita battery 122 after use.
If the Makita battery 122 has not been used for long periods, charge it for more than the time specified in the table above. (Example: If it has not been used for six months, charge it for approx. one week.) Chargingcontinues even after the charging light goes out. If the battery is left uncharged for more than six months, it may become unchargeable. If the light does not come on within five minutes after you start the charging, the battery may be unchargeable. Ship or take the charger and the battery to your nearest Makita Service Center or Distributor for checking.
Installing the grip
Attach the grip onto the groove in both sides of the tool and secure with the two screws.
Screwdriver
