Makita XSV10 warranty NO. Used, SL HX HD Wash AB

7- L - F

10- -1 1

-16

17-

ITEM	PESCRIPTION			NO. USED
_ _ _ _ ~
1	Screw Truss Hd V 4 " x		Type AB	2*
2	Screw #8 x '/z"	Ph Pan Hd Type AB		1*
3	Handle			1
4	Motor Housing Cover Assembly			1
5	Cord			1
6	Foam Insert Cover			1
7	Cord Retainer			1
8	Switch Box			1
9	Switch			1
10	Motor Housing			1
11	Foam Motor Housing - Inner			1
12	Foam Motor Housing - Outer			1
13	Gasket - Upper Motor			1
14	Ground Screw #lo-24x l / ~ " Type F			1*
15	Motor			1
16	Wire Nut *			1*
17	Gasket - Lower Motor			1
18	Motor Mounting Plate			1
19	Ball Float			1
20	Lid Latch			3
21	Lid and Cage			1
22	Cartridge Filter			1
23	Screw #lo X	SL HX HD WASH AB		7'
24	Screw #10 x Vh" Hex Head			2*
25	Handle Package			1
26	Inlet Fltthg			1
27	Tank Assembly			1

Standard hardware item, purchase locally.

Printed in USA.

Dolly Assembly

a.Remove head from tank and place tank upside down on a flat surface.

b.Place wheels on rear frame/axle assembly with extended hub towards dolly frame and place cap nut on axle and secure with hammer.

c.Insertcaster socket into front frame and secure with philips head screw.

d.Place groove in front frame into lip of tank and positionso frame is directly above inlet.

e.Position grooves of rear frame on lip of tank and align so rear and front frames engage.

f.Secure dolly frame to tank by placing hex head screws up through holes in dolly frame. Insure head of screw is fully recessed in area provided. After machine screw is inserted, tighten with '/4" flat washer and hex nut. (See Drawing A).

g.Insert caster in caster socket and apply downward pressure until caster snaps into place.

h.Place tank upright on dolly

ITEM	DESCRIPTION	NO. USED
1	Cap Nut	2
2	Axle	1
3	Wheel	2
4	Rear Frame	1
5	Caster Socket	1
6	Front Frame	1
7	Screw #8x VZ''PH Truss Type A	1*
8	Screw %-20x % Lg. Hex Hd.	6*
9	Flatwasher 'h"	6'
10	Hex Nut '/4 - 20	6'
11	Caster	1
12	Carriage Handle	1

Standard hardware item, purchase locally.

3

AI

Your Makita Wet/Dry Vac includes a metal carriage han- dle for ease in transporting the vacuum. Place metal handle between tank and plastic side handles, and fas- ten tightly with screws provided. Be sure to spread ends of carriage handle when assembling to prevent damage to drum.

If your Makita WeVDry Vac ever needs repair or maintenance during the warranty period or any time thereafter, there are Factory and Authorized Service Centers located across the country. (Please see the accompanying list, current Makita catalog or consult your local yellow pages.)

Do not attempt to service your Makita WeVDry Vac beyond that described in the Owner's Manual. For all other servicing, please refer to a qualified Makita Service Center.

Makita U.S.A., Inc.

14930 Northam Street

La Mirada, CA 90638-5753

87510-27