K00119 BIN DEFLECTOR KIT
Installation Instructions
NOTE: This kit will convert a
1.Remove the gasket material along the front and both sides of the bin.
2.Remove the #8 screws holding the current ice deflector. Save these screws – a total of six from a
3.Remove the ice deflector.
4.Place new ice deflector in position and use the slots in the side flanges as guidance to drill four 1/8” holes.
5.Fasten the ice deflector using the screws removed in step 2 for the front and the four supplied screws, two each side, for the side flanges. NOTE:
6.Install the new gasket material along the front and sides of the bin.
48” Gasket
Supplied Screws
Drill 1/8” Holes
Both Sides
(See Step 4)
Ice Machine Back
24” Gasket
Both Sides
Supplied Screws
New Deflector
Manitowoc Ice, Inc.
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI |
|
Telephone | 8010253 |
Web Site - www.manitowocice.com | Rev. 06/13/03 |