Lincoln Electric 300 DLX manual Installation, Input - Diesel Engine, Rated Output - Welder

A-1 INSTALLATION A-1

TECHNICAL SPECIFICATIONS - Ranger 300 D (K1522-1), Ranger 300 DLX (K1522-2)

			INPUT - DIESEL ENGINE
Make/Model	Description		Speed (RPM)	Displacement			Starting		Capacities
							System
Kubota	3 cylinder		High Idle 3700	54.9 cu. in			12VDC battery		Fuel: 10 gal.
DH905	26.0 HP @		Low Idle 2150	(898 cc)			(Group 45, 495		38 L
Diesel Engine	3600 RPM		Full Load 3600				cold crank amps)
				Bore x Stroke
							1 KW Starter		Oil: 5.4 Qts.
							30 A. Alternator		5.1 L
				2.83” x 2.90”			w/ built in reg.
				(72 mm x 73.6mm)					Coolant: 5.7 qts.
									5.4 L
			RATED OUTPUT - WELDER
Welding Output			Volts at Rated Amps			Duty Cycle		Max. OCV @ 3700 RPM
DC Constant Current 300 amps			25 volts			100%
AC Constant Current 300 amps			25 volts			100%		80 volts RMS
DC Constant Voltage (300 D) 200 amps			20 volts			100%
DC Constant Voltage (300 DLX) 300 amps			30 volts			60%*
DC Constant Voltage (300 DLX) 280 amps			30 volts			100%
			OUTPUT - GENERATOR
			Auxiliary Power 1
			12,000 Watts, 60 Hz
			120/240 Volts
			100 % Duty Cycle
			PHYSICAL DIMENSIONS
HEIGHT		WIDTH			DEPTH				WEIGHT
37.38 in.		24.75 in.			60.50 in.			1093 lbs. (300 D)
								1133 lbs. (300 DLX)
949.4 mm		628.7 mm			1528.6 mm			480.8 kg. (300 D)
								499.0 kg. (300 DLX)

*Duty cycle is based on a 10 minute period. The machine can be loaded to 300 amps for 6 minutes out of every 10 minute period.

1.Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to rated capacity. When welding, available auxiliary power will be reduced.

RANGER 300 D AND 300 DLX