GENERAL OPTIONS /
ACCESSORIES
The following options/accessories are available for your RANGER 300 from your local Lincoln Distributor.
K953-1 Two-Wheeled Trailer - For in-plant or yard towing of the RANGER 300. Suitable for road towing with optional Fender and Light Kit. Load capacity is 2,100 lbs.
K802-R Power Plug Kit - Provides four 15 amp, 115 volt plugs and one 50 amp, dual voltage (115/230V), full kVA plug.
K703 Accessory Kit - Includes the following:
•Thirty-five feet (10.5 meters) of #1/0 AWG elec- trode cable.
•Thirty feet (9.1 meters) of # 1/0 AWG work cable.
•Headshield with No. 12 filter.
•GC500 work clamp.
•Cooltong® 300 insulated electrode holder.
The cables are rated at 300 amps, 100 duty cycle.
K903-1 Spark Arrester Kit - A field-installed kit for the RANGER 300 engine muffler exhaust pipe (either engine option). Includes a heavy-gauge steel, approved spark arrester, mounting clamp and adapter.
K857 Remote Control - Includes a control box with 25 feet (7.5 meters) of 4 conductor cable. Allows out- put voltage to be controlled remotely.
K896-1 GFCI Receptacle Kit - Includes two UL approved 120 volt ground fault circuit interrupter receptacles (duplex type) with covers and installation instructions. Each receptacle is rated 15 amps, but the maximum total current from each GFCI duplex is limited to 20 amps. The GFCI receptacles replace the two factory installed 120 volt duplex receptacles.
TIG WELDING OPTIONS /
ACCESSORIES
K930-1 TIG Module - The TIG Module is an accesso- ry that provides high frequency and shielding gas con- trol for AC and DC GTAW (TIG) welding applications. It provides contactor control of constant current weld- ing power sources having an internal contactor.
The TIG Module is supplied without accessories, Arc Start switches, Amptrols, cables, torches and mount- ing brackets must be purchased separately.
K939-1 Docking Kit - For mounting the K930-1 TIG Module on top of the Ranger 300.
K936-1 Control Cable - Control cable for 300 DLX for connecting the K930-1 TIG Module to a RANGER 300 DLX.
K936-3 Control Cable - Control cable for connecting K930-1 TIG module to a Ranger 300 D.
K814 Arc Start Switch - A remote start switch used in conjunction with the K930-1 TIG Module to energize the RANGER 300 DLX output terminals via the TIG module.
K963 Hand Amptrol - Remote output control on RANGER 300 D/DLX and contactor control on Ranger 300 DLX.
K870 Foot Amptrol - Remote output control on RANGER 300 D/DLX and contactor control on Ranger 300 DLX.
SEMIAUTOMATIC FCAW AND MIG WELDING (RANGER 300 DLX)
OPTIONS / ACCESSORIES
LN-25 Wire Feeder - This portable unit provides CC/CV for flux-cored arc welding (FCAW) and metal inert gas welding (MIG).
LN-7 or LN-8 Wire Feeder - Semiautomatic constant speed wire feeders.
NOTE: Gas-shielded welding requires a Magnum Gun. Gasless welding requires an Innershield Gun.
K487-25 Magnum Spool Gun - A lightweight, semi- automatic wire feeder for aluminum welding with argon gas. Has built-in remote wire speed control in the handle. Requires the K488 SG Control Module. Includes 50 feet (15.2 meters) of power cable.
K488 SG Control Module - Controls wire speed and gas flow. Provides the required control interface between the RANGER 300DLX and the K487-25 Magnum Spool Gun.
