Mantis E" System owner manual Replacement Blade Installation

Replacement Blade Installation

Tools: 9/16" wrench, pin or screwdriver

1.Lock the gear shaft by inserting the pin or screwdriver through the aligned keyholes in the gear case cover and the gear case to prevent rotation (Picture 19).

2.Hold the pin or screwdriver in place and remove bolt by turning it clockwise (Picture 20), then remove clamping plate (Picture 21), and worn blade (Picture 22).

3.Place new blade (Picture 23), re-install clamping plate (Picture 24), and bolt (Picture 25). Use wrench to tighten the blade-mounting bolt. If bolt is worn or damaged use a new one. Replace worn or damaged blade and bolts in sets to preserve balance.

Picture 19 Picture 20

WARNING – DANGER

BE SURE UNIT IS UNPLUGGED BEFORE

MAKING ANY ADJUSTMENTS.

Picture 21 Picture 22

Picture 23 Picture 24

Picture 25

8