Mantis Swift Split owner manual M. Troubleshooting, N. Storage, Problem, Possible cause, Remedy

M. Troubleshooting

Problem	Possible cause		Remedy
	• Incorrect positioning of the log	•	Re-position the log
	• Log exceeds permitted dimensions or	• Put this log aside and try
	the wood is too hard for the capacity		different one
	of the machine
	• Wedge has burrs, nicks or flat spots	• Sharpen the splitting wedge as
Log fails to split	and needs to be sharpened		directed in section J
	• Oil level is low	• Adjust the oil level
	• Leak of hydraulic oil. Hydraulic	• Place piece of cardboard under the
	pressure is too low.		log splitter to locate the leak.
			Worn components should be
			replaced. Contact qualified
			hydraulic mechanic for assistance
			or call 1-800-366-6268.
	• Air in the system	• Open bleed screw, and cycle pressure
Pressure plate advances			plate of the log splitter three to four
			times back and forth to help remove
with a jerky motion or
			any air that may have mixed into the
with strong vibration
			hydraulic fluid.
	• Hydraulic fluid level is low	• Check and adjust hydraulic oil level.
Slow Pressure Plate Response	• Hydraulic fluid level is low	• Check and adjust hydraulic oil level.
	• Bleed screw was not tightened	• Tighten the bleed screw before
	before machine was moved		moving log splitter
Hydraulic oil leak	• Worn hydraulic oil seals.	•	Contact qualified hydraulic
			mechanic for assistance or
			call 1-800-366-6268.

N.Storage

1.Clean Unit.

2.Lubricate for rust prevention

3.Tighten the Air Bleed Screw

4.Fold in the handle (optional)

5.Store indoor in a sheltered/dry area not accessible to children.

17