Marantz 6000 Troubleshooting Guide, When To Use Reset Switch, Care And Main Tenance, Repairs

TROUBLESHOOTING GUIDE

If your Tuner should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization.

	Symptom	Probable cause (s)	Suggested remedy
	No sound	INPUT SELECTOR of amplifier is not Select	set to “TUNER”
		“TUNER” in INPUT SELECTOR
		Volume of amplifier positioned in “MIN.”	Adjust Volume accordingly
		The terminal for system connection is pullet out.	Connect the terminal for system
			Connection correctly
	Only noise is heard	The antenna is pulled out	Connect the antenna on the rear panel.
		The frequency is not detected exactly	Set the frequency correctly
	Broadcasting is received but with	The position of antenna is not suitable.	Install the antenna again after locating the best
ENGLISH	noise		reception position.
		The power of CD player is turned on	Turn off CD player.

WHEN TO USE RESET SWITCH

•When this system is subjected to an electrical shock.

•When the power is irregular.

In the above cases, function buttons may not often operate or the display may operate wrongly. In these cases, try the following:

—Rear panel —

RESET SWITCH

LINE OUT	REMOTE
	CONTROL

RESET

R L

Press the RESET switch lightly once or twice with a pencil or a ballpoint pen.

CARE AND MAIN TENANCE

This section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz equipment.

CLEANING OF EQUIPMENT EXTERNAL SURFACES

The exterior finish of your ST6000 will last indefinitely with proper care and cleaning. Never use scouring pads, steel wool, scouring powders or harsh chemical agents (e.g., lye solution), alxohol, thinners, benzine, insecticide or other volatile substances as these will mar the finish of the equipment. Likewise, never use cloths containing chemical substances. If the equipment gets dirty, wipe the external surfaces with a soft, lint- free cloth.

If the equipment becomes heavily soiled:

–dilute some washing up liquid in water, in a ratio of one part deter- gent to six parts water;

–dip a soft, lint free cloth in the solution and wring the cloth out until it is damp;

–wipe the equipment with the damp cloth;

–dry the equipment by wiping it with a dry cloth.

REPAIRS

Only the most competent and qualified service technicians shoud be allowed to service your unit. Marantz and its factory trained warranty station personnel have the knowledge and special equipment needed for the repair and calibration of this precision instrument.

In the event of difficulty, call the proper toll-free telephone number listed on the face of the warranty to obtain the name and address of the Marants Authorized Service Center nearest you. In many cases, the dealer where you purchased your Marants unit may be equipped to provide service. Please include the model, serial number of your unit together with a copy of your purchase receipt and a full description of what you feel is abnormal in its behaviour.

Memory backup

•In case a power outage occurs or the power cord is acciden- tally unplugged, the ST6000 is equipped with a backup func- tion to prevent memory data such as the preset memory from being erased.

The memory funcitons are backed up for up to about one week.

4