INTRODUCTION
Thank you for selecting the Marantz ST6000 FM/AM Stereo Tuner for your system.
Please read these operating instructions carefully. We recommend that you read the entire user guide before you attempt to connect or operate the Tuner.
After you have reviewed the contents of this manual, we suggest that you make all system connections before you attempt to operate the unit.
Refer to the figures on the pages at the back of this user’s guide. The callout numbers on the figures correspond to those found in the text. All references to the connections and controls that are printed in BOLD type are as they appear on the unit.
INSTALLATION
Remember the following important points when installing the Tuner.
•Do not expose the component to rain or moisture, as this may cause damage to the Tuner.
•Prevent extra heat from reaching the unit. Never put the Tuner in the full glare of the sun or near a heat source.
PRECAUTIONS
The following precautions should be taken when operating the equip- ment.
GENERAL PRECAUTIONS
When installing the equipment ensure that:
—air is allowed to circulate freely around the equipment.
—it is placed on a
—it will not be exposed to excessive heat, cold, moisture or dust.
—it will not be exposed to direct sunlight.
—it will not be exposed to electrostatic discharges.
In addition, never place heavy objects on the equipment.
If a foreign objector water does enter the equipment, contact your near- est dealer or service center.
Do not pull out the plug by pulling on the mains lead; grasp the plug itself.
It is advisable when leaving the house, or during a thunderstorm, to disconnect the equipment from the AC outlet.
ST6000 FEATURES
•
•Remote control operation
•Select the FM Antenna A/B
•Select the IF band (wide/narrow)
•Fine Tuning
LOCATION AND FUNCTION OF PARTS AND CONTROLS
FRONT PANEL FEATURES
(SEE APPEARANCE DRAWING)
qPOWER ON /STANDBY button
This button is used to power on or power standby.
wANTENNA A/B button
This button is used selection of the FM antenna A or B.
eIF BAND button
This button is used for selecting the bandwidth of the FM broadcast.
rTIME ADJ (adjust) button
This button is used for adjusting the current time.
tST.NAME/DISPLAY button
This button is used for manual tuning or selecting the display mode. Press this button slightly longer (for more than 1.5 second) to file in manually stations name in the preset memory.
yTUNING MODE button
This button is used for selecting the manual tuning or the fine tuning mode. Fine tuning mode is available only in the FM band.
uTUNING 5∞ (UP/DOWN) button
This button used for tuning in the desired broadcasting stations or adjusting the time, or manual tuning, etc.
iCANCEL button
This button is used for canceling the program during manual file or adjusting the on/off time of the timer.
oNEXT button
This button is used for advancing to the next step during time ad- justment or manual filing, etc.
!0MEMO button
This button is used for presetting the broadcasting stations.
!1(Timer) ON/OFF button
This button used for engaging the daily timer function.
!2TIMER SET button
This button is used for presetting the time when the system is turned on and off every day at a specified time.
!3PRESET 5∞ (UP/DOWN) button
This button used for preset in the desired broadcasting stations.
!4FM MODE button
This unit automatically switches into the STEREO mode when a FM stereo broadcast is received press this button to change the mon- aural mode, then the “STEREO” indicator will go out on the display.
!5BAND button
This button is used for selecting the FM or AM broadcast.
!6DISPLAY/INDICATOR
aTIMER
This indicator light up when the daily timer is engaged by press- ing the timer button.
bDAILY timer indicator
cTUNED indicator
dSTEREO indicator
eMEMORY indicator
fPRESET Number indicator
gFM IF band indicator
hAntenna A or B indicator
ENGLISH
1
