SPECIFICATIONS
1. General
Type | Compact disc digital audio system | ||
Power requirements | AC 120V, 60 Hz | ||
Power consumption | 15 | W | |
Power consumption in standby mode | 1 | W | |
Operating temperature | +5°C – | +35°C | |
| (+41°F – | +95°F) | |
Weight ( without package ) | 7.8 kg (17.2 lbs) | ||
External dimensions | 440 (W) X 434 (D) X 193 (H) mm | ||
2. Audio section
Frequency response | 2 Hz - 20 kHz |
S/N ratio | 98 dB or more (EIAJ) |
Dynamic range | 96 dB or more (EIAJ) |
Harmonic distortion | 0.003 % or less (EIAJ) |
Level difference between channels | 1.0 dB or less (EIAJ) |
Output voltage | 2 Vrms (EIAJ) |
Wow and flutter | less than ± 0.001 % (W.PEAK) |
( below measurable level ) (EIAJ) | |
Channels |
3. Input/Output terminal Audio line output jack Remote Control IN/OUT jack Optical digital output jack
PC keyboard input jack
4. Accessories |
|
• Remote controller | 1 |
• Size AA/R6 dry cell batteries | 2 |
• Audio cable | 1 |
• | 1 |
• Warranty card (U.S. and Canadian models only) | 2 |
• User Guide (this manual) | 1 |
!!etNo
Specifications and design subject to possible modification without notice, due to improvements.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or an electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest MARANTZ authorized service center or your dealer for a replace- ment.
ENGLISH
CD CHANGER CC9100
|
|
|
| DIRECT CUSTOM | DISC/CHARA |
| |
MODE | CLEAR | PROGRAM | RANDOM | TIME/CHARA |
|
|
|
|
|
|
| OPEN/CLOSE | UNLOAD | PLAY/PAUSE | STOP |
POWER |
|
| SINGLE LOADER |
|
|
| |
|
|
|
|
| KEYBOARD |
|
|
POWER ON DEMO display
POWER ON DEMO display mode allows you to see variations of the display. To enter the POWER ON DEMO display mode, press POWER ON/STANDBY and then 4/ 1 within 1 second after turning on the power.
To cancel the POWER ON DEMO display mode, press any button.
25