ENGLISH
Advanced connections
Getting started
Preparations
Connecting cables
Select the cables according to the equipment being connected.
Audio cables
Optical digital connections
Optical cable (sold separately)
Coaxial digital connections
Coaxial digital cable (sold separately)
Remote control connection
Remote connector cord (supplied)
Digital connections
CD recorder /
MD recorder
AUDIO
OPTICAL COAXIAL
ININ
When connecting the optical digital output connector with an optical transmission cable (sold separately)
Match the shapes then insert firmly.
Remote control connection
When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly.
nConnection
Use the supplied remote connection cable to connect the REMOTE CONTROL IN terminal of this unit to REMOTE CONTROL OUT terminal of the amplifier.
nSetting
Set the remote control switch on the rear panel of this unit to “EXTERNAL” to use this feature.
•This setting will disable remote sensor reception of this unit.
•To operate the unit, point the remote control at the remote sensor of the amplifier.
To use this unit without connecting it to the amplifier, set the remote control switch to “INTERNAL”.
The unit
Set to “EXTERNAL.”
Remote connector cord (supplied)
Signal flow
Amplifier
Basic connections Basic operation Advanced connections Advanced operations Explanation of terms Troubleshooting Specifications Index
12
