3Controls & Displays
13
English

Front panel

1 STANDBY indicator
• Lights when the unit is in standby.
2 Disc tray
• Place the disc here.
3 AUDIO EX indicator
• Lights when the AUDIO EX is activated using the
AUDIO EX button on the remote control.
• The sound quality of analog audio output is
improved by turning off analog video signal
output and the front panel display.
• It is applied to CDDA, Super Audio CD (CD
Layer) and DTS CD in Play mode.
4 HDMI
• The HDMI on/off state toggles when pressed
for three seconds or more. When on, the HDMI
indicator is lit.
• Pressing this button while HDMI is
enabled displays the current resolution.
Pressing this button again while the
resolution is dis played allows you to select
the resolution in the se quence below:
480p Æ 576p Æ 720p Æ 1080i Æ 480p
5 HDMI indicator
• When the connected device is HDMI/DVI
compatible, the light fl ashes red.
6 3 (PLAY)
• Begins playing the disc play.
7 7 (STOP)
• Stops playing the disc play.
8 8 (PAUSE)
• Pauses playing the disc play.
9 POWER ON/STANDBY
• Press to turn the power on, and press it again to
enter STANDBY mode.
10 Display
• Operation indications are displayed here.
11 0 (OPEN/CLOSE)
• Press to open and close the disc tray.
12 4/1
• Press to skip reverse title, chapter, or track. You
can also press and hold this button for Fast
Reversed.
13 ¡/¢
• Press to skip forward title, chapter, or track.
You can also press and hold this button for Fast
Forward.