English
Connecting antenna
* To get better picture quality, adjust the direction of antenna.
Connecting to wall antenna socket
●In case of wall antenna socket in apartment houses, connect the antenna cable as shown below. (Use the correct type of antenna cable to the type of wall antenna socket.)
Apartments |
| Turn clock arise to |
|
|
| tighten. |
|
|
75Ω round cable | bronze wire | DC 12V | ANT IN PC/DTV INPUT C |
|
|
| 75 Ω |
300Ω flat cable |
|
|
|
| antenna |
|
|
| converter |
|
|
wall connecting port |
| antenna input port | |
|
|
| |
CONNECTION
*In case of 75Ω round cable, insert the bronze wire and then tighten the connecting nut. And in case of 300Ω flat cable, connect the twisted wire to the antenna converter and then connect the converter to the antenna input port.
*When using 75Ω round cable, do not bend bronze. It may cause poor picture quality.
Connecting to outdoor antenna
●This type of antenna is usually used at common private houses.
Private house
VHF antenna | Turn clock arise to |
|
|
tighten. |
|
| |
UHF | 75Ω round cable |
|
|
bronze wire | DC 12V | PC/DTV INPUT C | |
antenna |
| ANT IN | |
| 75 Ω |
| |
| 300Ω flat cable |
|
|
| antenna |
|
|
| converter | antenna input port | |
*In poor signal area, you can get better picture quality if you install the anten- na like the figure as shown right.
*If an antenna is divided to two TV
sets, use “signal divider” for connect- VHF ing.
UHF
DC 12V | PC/DTV INPUT | C |
ANT IN | ||
75 Ω |
|
|
signal
amplifier
9
