Marantz MV8300 34 EN, OK, BACK, POWER, POWER, Then;, Set the, TIMER (), 5 TIMER (), —go to step, DAILY WEEKLY, — go to step, TIMER RECORDING, VCR/TV/CABLE/DBS

PROG.

SET

TIMER PROGRAM

PLUSCODE NUMBER SET

34 EN TIMER RECORDING

VCR Plus+®

Timer

Programing

●Turn on the VCR and the TV, and select the AV mode on the TV.

●Set the VCR/TV/CABLE/DBS selector on the Remote to “VCR”.

POWER 1

IN F-1

+

TIMER ()

Timer recording allows you to program the VCR to automatically record a broadcast at some future time. Up to 24 timer recording programs can be made using VCR Plus+ timer programing or Express timer programing method (
pg. 38) as far as a year in advance.

The VCR Plus+ timer programing system eliminates the need to input channel, date, start and stop time data when programing timer recording settings. Simply key in the PlusCode number for the TV broadcast you wish to record and the VCR’s timer will be automatically programed. (The PlusCode programing numbers are the numbers next to the program in most TV listing.)

1 Load a cassette

Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR.

●The VCR turns on, and the counter is reset, automatically.2Access VCR Plus+ screenPress PROGRAM on the Remote.●The clock must be set to access theVCR Plus+ screen.

If you have not set PRESS NUMBER KEYS [0-9] OR

the clock, the Main Menu screen

EXIT START STOP DATE CH PRESS [+/–] TO SET EXPRESS PROGRAMMING

POWER

VCR CABLE

TV /DBS

28

5 TIMER ()

36

DAILY WEEKLY

34

BACK 7

appears after an error message is displayed. Refer to page 10 for the clock setting procedure.

3Enter PlusCode number

Press the appropriate	TIMER PROGRAM
Number keys to input		PLUSCODE NUMBER SET
the PlusCode number		1 2 3 4 5
printed in the TV
listings for the TV	SET
broadcast you wish
	PROG.	PRESS NUMBER KEYS [0-9] OR

to record, then press	EXIT START STOP DATE CH PRESS [+/–] TO SET EXPRESS PROGRAMMING
OK.

Then;

If the Guide Channel Set screen appears— go to step 4.If the VCR Plus+ Program screen appears—go to step 5.●To make corrections, press CANCEL and input the correct PlusCode number.

●If an incorrect PlusCode number or the one for a broadcast already finished has been inputted,

“PLUSCODE NO. ERROR CONFIRM PLUSCODE NO. THEN RETRY” is displayed for about 5 seconds, then the VCR Plus+ screen reappears.