POWER/STANDBY indicator
Power | POWER/ | Power | Description | Turning the picture |
management | STANDBY | management |
| back on |
mode | indicator | operating status |
|
|
|
|
|
|
|
On | Green | Not activated. | Horizontal and vertical | Picture already on. |
|
|
| synchronizing signals |
|
|
|
| are present from the |
|
|
|
| computer. |
|
|
|
|
|
|
Off | Red | Activated. | Horizontal and/or | Operate the keyboard or |
|
|
| vertical synchronizing | mouse. The picture |
|
|
| signals are not sent | reappears. |
|
|
| from the computer. |
|
|
|
|
|
|
Setting the picture to suit the movie
The film image is automatically discriminated and projected in an image mode suited to the picture. [NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I (50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]
Example: Setting the “CINEMA MODE” to “OFF”
Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.
1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.
The “OPTION2” screen appears.
2.Use the ▲ and ▼ buttons to select “CINEMA MODE”.
3.To set the CINEMA MODE to “OFF” ...
Use the ◀ and ▶ buttons to select “OFF”.
The mode switches as follows each time the ◀ or ▶ button is pressed:
ON ↔ OFF
|
|
| OPTION2 |
| 2 / 3 | |
|
| PREVIOUS PAGE |
|
|
| |
POWER MGT. |
| : | OFF | |||
| CINEMA MODE |
| : | OFF | ||
|
|
|
|
|
| |
LONG LIFE |
|
|
|
| ||
GRAY LEVEL |
| : | 3 |
| ||
S1/S2 |
| : | OFF | |||
|
| NEXT PAGE |
|
|
|
|
|
| SEL. | ADJ. |
| EXIT | RETURN |
Information
⬛CINEMA MODE
ON | Automatic discrimination of the |
| image and projection in cinema mode. |
OFF | Cinema mode does not function. |
⬛Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
Reducing burn-in of the screen
The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce
Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.
1.On the MAIN MENU, select “OPTION2”, then press the MENU/ENTER button.
The “OPTION2” screen appears.
2.Use the ▲ and ▼ buttons to select “LONG LIFE”, then press the MENU/ENTER button.
The “LONG LIFE” screen appears.
|
|
|
| LONG LIFE |
|
|
| PLE |
| : | AUTO | ||
|
|
|
|
|
| |
ORBITER | : | OFF | ||||
INVERSE | : | OFF | ||||
SCREEN WIPER | : | OFF | ||||
SOFT FOCUS | : | OFF | ||||
|
| SEL. | ADJ. |
| RETURN | |
|
| EXIT | ||||
3.Set the LONG LIFE mode using ▲▼ ◀ and ▶ buttons. See page 27 to set PLE.
See page 28 to set ORBITER. See page 28 to set INVERSE.
See page 29 to set SCREEN WIPER. See page 30 to set SOFT FOCUS.
Information
⬛Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.
PLE (Peak Luminance Enhancement)
Use this to activate the brightness limiter.
Example: Setting “PLE” to “LOCK1”
Perform Steps 1-2 of LONG LIFE, then...
3.Use the ▲ and ▼ buttons to select “PLE”.
4.Use the ◀ and ▶ buttons to select “LOCK1”.
The mode switches as follows each time the ◀ or ▶ button is pressed:
→ AUTO ↔ LOCK1 ↔ LOCK2 ↔ LOCK3←
|
|
|
| LONG LIFE |
|
|
| PLE |
| : | LOCK1 | ||
|
|
|
|
|
| |
ORBITER | : | OFF | ||||
INVERSE | : | OFF | ||||
SCREEN WIPER | : | OFF | ||||
SOFT FOCUS | : | OFF | ||||
|
| SEL. | ADJ. |
| RETURN | |
|
| EXIT | ||||
27
Information
⬛PLE settings
AUTO .............. The brightness of the screen is
adjusted automatically to suit the picture quality.
