P. ON DELAY (Power on delay)
Use this function to activate
Turn on the AUTO ID before the following operations.
Example: Setting “ON”
Perform Steps 1-2 of VIDEO WALL, then...
3.Use the ▲ and ▼ buttons to select “P. ON DELAY”.
4.Use the ◀ and ▶ buttons to select “ON”.
The mode switches as follows each time the ◀ or ▶ button is pressed:
OFF ↔ ON
|
|
|
|
| VIDEO WALL |
|
|
|
| DIVIDER | : | 1 |
|
| |||
| POSITION |
|
|
|
| |||
| DISP. MODE | : | SPLIT |
| ||||
| AUTO ID | : | OFF |
| ||||
| IMAGE ADJUST |
|
|
|
| |||
|
| P. ON DELAY |
| : | ON |
| ||
|
|
|
|
|
|
|
| |
| PLE LINK | : | OFF |
| ||||
| REPEAT TIMER | : | OFF |
| ||||
|
|
| SEL. | ADJ. | EXIT | RETURN |
| |
|
|
|
|
| ||||
Information |
|
|
|
| ||||
⬛P. ON DELAY settings
ON ...... Turns on the main power of each display after
a delay time.
OFF .... Turns on the main power of all displays at the
same time.
* Once this function has been set to “ON”, POWER ON/ |
OFF button on the remote control does not function |
except for the No.1 monitor. |
By pressing the POWER ON button on the remote |
control the No.1 monitor will turn on and the others |
will be turned on one by one automatically. |
* From the second monitor onward, neither the POWER |
button on the unit nor the POWER ON button on the |
remote control does function. However, by pressing and |
holding the POWER ON button for more than 3 seconds, |
PLE LINK
Use this function to set a uniform brightness for each display.
Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9) before the following operations.
Example: Setting “ON”
Perform Steps 1-2 of VIDEO WALL, then...
3.Use the ▲ and ▼ buttons to select “PLE LINK”.
4.Use the ◀ and ▶ buttons to select “ON”, then press the MENU/ENTER button.
The mode switches as follows each time the ◀ or ▶ button is pressed:
OFF ↔ ON
|
|
|
|
| VIDEO WALL |
|
|
|
| DIVIDER | : | 1 |
|
| |||
| POSITION |
|
|
|
| |||
| DISP. MODE | : | SPLIT |
| ||||
| AUTO ID | : | OFF |
| ||||
| IMAGE ADJUST |
|
|
|
| |||
| P. ON DELAY | : | OFF |
| ||||
|
| PLE LINK |
| : | ON |
| ||
|
|
|
|
|
|
|
| |
| REPEAT TIMER | : | OFF |
| ||||
|
|
| SEL. | ADJ. | EXIT | RETURN |
| |
|
|
|
|
| ||||
Information |
|
|
|
| ||||
⬛PLE LINK settings
ON ...... Sets a uniform brightness for each screen in a
video wall.
OFF .... Sets the individual screen brightness for each
screen in a video wall.
*When this function is set “ON”, connect your plasma
displays with the remote cable (optional) in the order of the position numbers for the 2⋅ 2 video wall. See the
drawing below.
*If there are changes in the DIVIDER or POSITION, the PLE LINK will automatically turn OFF.
the monitor will be turned on. |
REMOTE IN
REMOTE OUT
No.1 No.2
No.4 No.3
Display 1
No.1 No.2
No.4 No.3
Display 4
REMOTE
OUT
REMOTE IN
REMOTE
OUT
REMOTE 
IN
No.1 No.2
No.4 No.3
Display 2
No.1 No.2
No.4 No.3
Display 3
REMOTE OUT
REMOTE IN
*With the 3⋅ 3 video wall, connect the final display to the first display the same way as with 2⋅ 2 video wall.
Note: The remote control can be operated unless the IR REMOTE is set to “OFF”.
38
