Marantz PD5001 manual External Control, Pin Assignments, Application, Connections, Pc/Rgb

External Control

Application

These specifications cover the communications control of the plasma monitor by external equipment.

Connections

Connections are made as described below.

External equipment e.g., Personal computer

Display

Connector on the plasma monitor side: EXTERNAL CONTROL connector.

Use a crossed (reverse) cable.

Type of connector: D-Sub 9-pin male

Pin No.	Pin Name	Pin No.	Pin Name
1	No Connection	6	DSR (DCE side ready)
2	RXD (Receive data)	7	RTS (Ready to send)
3	TXD (Transmit data)	8	CTS (Clear to send)
4	DTR (DTE side ready)	9	No connection
5	GND

1 2 3 4 5

6 7 8 9

Communication Parameters

(1)	Communication system	Asynchronous
(2)	Interface	RS-232C
(3)	Baud rate	9600 bps
(4)	Data length	8 bits
(5)	Parity	Odd
(6)	Stop bit	1 bit
(7)	Communication code	Hex

External Control Codes (Reference)

FUNCTION		CODE DATA
Power ON		9FH	80H	60H	4EH	00H	CDH
OFF		9FH	80H	60H	4FH	00H	CEH
Input Switch	Video1 (RCA)	DFH	80H	60H	47H	01H	01H	08H
	Video2 (S-Video)	DFH	80H	60H	47H	01H	02H	09H
	DVD/HD1 (RCA)	DFH	80H	60H	47H	01H	05H	0CH
	DVD/HD2 (RCA)	DFH	80H	60H	47H	01H	06H	0DH
	DVD/HD3 (HDMI)	DFH	80H	60H	47H	01H	0EH	15H
	PC/RGB (mini D-sub 15-pin)	DFH	80H	60H	47H	01H	07H	0EH
	DVD/HD4 (HDMI)	DFH	80H	60H	47H	01H	1AH	21H
Audio Mute	ON	9FH	80H	60H	3EH	00H	BDH
	OFF	9FH	80H	60H	3FH	00H	BEH
Picture Mode	NORMAL	DFH	80H	60H	OAH	01H	01H	CBH
	THEATER 1	DFH	80H	60H	OAH	01H	02H	CCH
	THEATER 2	DFH	80H	60H	OAH	01H	03H	CDH
	DEFAULT	DFH	80H	60H	OAH	01H	04H	CEH
	BRIGHT	DFH	80H	60H	OAH	01H	05H	CFH
Screen Mode	STADIUM	DFH	80H	60H	51H	01H	02H	13H
	ZOOM	DFH	80H	60H	51H	01H	03H	14H
	NORMAL	DFH	80H	60H	51H	01H	04H	15H
	ANAMORPHIC	DFH	80H	60H	51H	01H	05H	16H
	UNDERSCAN	DFH	80H	60H	51H	01H	08H	19H
	14 : 9	DFH	80H	60H	51H	01H	09H	1AH
	2.35 : 1	DFH	80H	60H	51H	01H	0AH	1BH
Auto Picture	ON	DFH	80H	60H	7FH	03H	03H	09H	00H	4DH
	OFF	DFH	80H	60H	7FH	03H	03H	09H	01H	4EH
Cinema Mode ON		DFH	80H	60H	C1H	01H	01H	82H
	OFF	DFH	80H	60H	C1H	01H	02H	83H

Pin Assignments

mini D-Sub 15-pin connector (Analog)

	PC/RGB
5		4	3	2	1
10		9	8	7	6
15	14		13	12	11
Pin No.		Signal (Analog)

1Red

2Green or sync-on-green

3Blue

4No connection

5Ground

6Red ground

7Green ground

8Blue ground

9No connection

10Sync signal ground

11No connection

12Bi-directional DATA (SDA)

13Horizontal sync or Composite sync

14Vertical sync

15Data clock

1/8 Stereo Mini Jack (not supplied) for REMOTE IN/OUT

Plasma monitor REMOTE IN

GND DATA (DC +5 V) VDD (DC +3 V)

Plasma monitor REMOTE OUT

GND DATA (C-MOS DC +5 V)

Note: Contact your local dealer for a full list of the External Control Codes if needed.

35