Set “ADVANCED OSM” to “ON” in the FUNCTION menu.
On “PICTURE FREEZE” of “FUNCTION” menu, select “BTM LEFT”.
F U N C T I O N
ADVANCED OSM | : | OFF | |
POWER MGT. | : | OFF | |
INPUT SKIP |
| : | OFF |
SUB . PICTURE |
|
| |
ZOOM NAV |
| : | BTM LEFT |
PICTURE FREEZE | : | BTM LEFT | |
PDP SAVER |
| : | MANUAL |
CLOSED CAPTION | : | OFF | |
CAPTION CONT | : | LOW | |
PWR . ON MODE |
|
| |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
PICTURE FREEZE Function
*This feature does not function during multi screen mode.
*Digital zoom is not available while this function is operating.
*A further press of the ACTIVE SELECT button while this function is operating will cancel this function.
*Providing a
PICTURE FREEZE settings OFF: Will not show the still image.
S BY S1, 2: The still images captured by pressing the ACTIVE SELECT button will be shown on the sub screen of
BTM LEFT~TOP LEFT: The still images captured by pressing the ACTIVE SELECT button will be shown on the sub screen of
PDP SAVER
PEAK BRIGHT | : | 100% | |
ORBITER |
| : | AUTO1 |
INVERSE/WHITE | : | OFF | |
SCREEN WIPER | : | OFF | |
SOFT FOCUS | : | OFF | |
OSM ORBITER | : | ON | |
OSM CONTRAST | : | LOW | |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
When set to AUTO
Set automatically, as described below.
PEAK BRIGHT: 100%
ORBITER: AUTO1 or AUTO2
INVERSE/WHITE: OFF
SCREEN WIPER: OFF
SOFT FOCUS: OFF
OSM ORBITER: ON
OSM CONTRAST: LOW
PEAK BRIGHT
Use this to activate the brightness limiter.
Example: Setting “PEAK BRIGHT” to “75%”
On “PEAK BRIGHT” of “PDP SAVER” menu, select “75%”.
PDP SAVER
PEAK BRIGHT | : | 75% |
ORBITER | : | AUTO1 |
INVERSE/WHITE | : | OFF |
SCREEN WIPER | : | OFF |
SOFT FOCUS | : | OFF |
OSM ORBITER | : | ON |
PC/RGB |
ACTIVE SELECT button
PC/RGB
ACTIVE SELECT button
OSM CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
PEAK BRIGHT settings
100%: The brightness of the screen is adjusted automatically to suit the picture quality.
75%, 50%, 25%: Sets maximum brightness.
S BY S1
PC/RGB | PC/RGB |
| or |
S BY S2 | |
PC/RGB | PC/RGB |
PC/RGB
PC/RGB
The brightness level decreases in the order of 75%, 50%, 25%. 25% provides minimum brightness.
* These values are approximate.
ORBITER
Use this to set the picture shift.
Example: Setting “ORBITER” to “AUTO2”
On “ORBITER” of “PDP SAVER” menu, select “AUTO2”.
PDP SAVER
PEAK BRIGHT | : | 100% |
ORBITER | : | AUTO2 |
INVERSE/WHITE | : | OFF |
SCREEN WIPER | : | OFF |
SOFT FOCUS | : | OFF |
OSM ORBITER | : | ON |
OSM CONTRAST | : | LOW |
Reducing image retention
The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce image retention.
Set “ADVANCED OSM” to “ON” in the FUNCTION menu.
On “PDP SAVER” of “FUNCTION” menu, select “MANUAL”, then press the MENU/ENTER button.
The “PDP SAVER” screen appears.
32
SEL. | ADJ. | EXIT RETURN |
Information
ORBITER settings
OFF: Orbiter mode does not function.
This is the default setting when PC/RGB is input. AUTO1: The picture moves around the screen intermittently, making the picture smaller. This is the default setting when a Video or a DVD/HD signal is input. Set to “OFF” when these signals are not used. AUTO2: The picture moves around the screen
