Information
RGB SELECT modes
AUTO: Select the suitable mode for the specifications of input signals as listed in the table “Computer input signals supported by this system” on page 39, 42 and 45.
The others: The available resolutions are shown. See page 39, 42 and 45 for the details of the above settings.
Setting the black level for HDMI signal
Set the black level.
Example: Setting the “HDMI SET UP” mode to “LOW”
Set “ADVANCED OSM” to “ON” in the FUNCTION menu.
On “HDMI SET UP” of “SET UP” menu, select “LOW”.
SET UP
LANGUAGE |
| : | ENGLISH |
DVD/HD1 INPUT | : | COMPONENT | |
D - SUB INPUT | : | RGB | |
HD SELECT |
| : | 1080 I |
RGB SELECT | : | AUTO | |
HDMI SET UP | : | LOW | |
COLOR SYSTEM | : | AUTO | |
BACK GROUND | : | GRAY | |
GRAY LEVEL | : | 3 | |
S1/S2 |
| : | OFF |
DISPLAY OSM | : | ON | |
OSM ADJ. |
| : | TOP LEFT |
REMOTE ID |
| : | ALL |
ALL RESET |
| : | OFF |
SEL. | ADJ. |
| EXIT RETURN |
Information
HDMI SET UP settings
LOW: When connected to the PC signal.
HIGH: When connected to the SET TOP BOX, DVD etc. Change “HIGH” into “LOW” if the black level appears gray.
Setting the video signal format
Use these operations to set the color systems of composite video signals or Y/C input signals.
Example: Setting the color system to “3.58 NTSC”
Set “ADVANCED OSM” to “ON” in the FUNCTION menu.
On “COLOR SYSTEM” of “SET UP” menu, select “3.58NTSC”.
SET UP
LANGUAGE |
| : | ENGLISH |
DVD/HD1 INPUT | : | COMPONENT | |
D - SUB INPUT | : | RGB | |
HD SELECT |
| : | 1080 I |
RGB SELECT | : | AUTO | |
HDMI SET UP | : | HIGH | |
COLOR SYSTEM | : | 3 . 58NTSC | |
BACK GROUND | : | GRAY | |
GRAY LEVEL | : | 3 | |
S1/S2 |
| : | OFF |
DISPLAY OSM | : | ON | |
OSM ADJ. |
| : | TOP LEFT |
REMOTE ID |
| : | ALL |
ALL RESET |
| : | OFF |
SEL. | ADJ. |
| EXIT RETURN |
Information
Video signal formats
Different countries use different formats for video signals. Set to the color system used in your current country. AUTO: The color systems are automatically identified and the format is set accordingly.
PAL: This is the standard format used mainly in the United Kingdom and Germany.
SECAM: This is the standard format used mainly in France and Russia.
4.43NTSC, PAL60: This format is used for videos in countries using PAL and SECAM video signals.
3.58NTSC: This is the standard format used mainly in the United States and Japan.
Setting the background color when no signal is being input
The color displayed on the background when there is no signal can be set to gray.
Example: Setting “BACK GROUND” to “BLACK”
Set “ADVANCED OSM” to “ON” in the FUNCTION menu.
On “BACK GROUND” of “SET UP” menu, select “BLACK”.
SET UP
LANGUAGE |
| : | ENGLISH |
DVD/HD1 INPUT | : | COMPONENT | |
D - SUB INPUT | : | RGB | |
HD SELECT |
| : | 1080 I |
RGB SELECT | : | AUTO | |
HDMI SET UP | : | HIGH | |
COLOR SYSTEM | : | AUTO | |
BACK GROUND | : | BLACK | |
GRAY LEVEL | : | 3 | |
S1/S2 |
| : | OFF |
DISPLAY OSM | : | ON | |
OSM ADJ. |
| : | TOP LEFT |
REMOTE ID |
| : | ALL |
ALL RESET |
| : | OFF |
SEL. | ADJ. |
| EXIT RETURN |
Information
BACK GROUND Settings
BLACK: Sets the background color to black.
GRAY: Sets the background color to gray.
Setting this makes it easier to see that there is no signal.
28
