Marantz PD6120D manual External Speaker Connections, Strip the ends of the speaker wires

External Speaker Connections

	VIDEO 1
	VIDEO 2
	VIDEO 3
1	L(MONO)
AUDIO	R
DVD1/HD1	Y
	C /P
	C /P
2	L(MONO)
AUDIO	R
	RGB 1

	R/C /P
RGB2/DVD2/HD2	G / Y
	B/C /P
	HD
	VD

3	L(MONO)
AUDIO	R

RIGHT	RGB 3
	LEFT

AC IN		SPEAKERS MUST HAVE		REMOTE	CONTROL
			EXTERNAL
	MORE THAN 7WATT RATING		CONTROL	CONTROL	LOCK
		IMPEDANCE 6 OHM			ON / OFF

External speakers may be connected to the plasma monitor to reproduce sound from VIDEO, DVD or RGB signal sources.

External speakers may be connected directly to the SPEAKERS terminals or indirectly by connecting a stereo system amplifier to the audio outputs.

CAUTION: Unplug the plasma monitor and all connected components before connecting external speakers. Use only speakers with 6-ohm impedance and a power input rating of 7 watts or more.

To connect external speakers directly to the plasma monitor:

1.Strip the ends of the speaker wires.

2.Press down the tabs below the SPEAKERS terminals, insert the speaker wire and release the tab to secure the speaker wire connection:

[a]Connect the right speaker (located at right side of the monitor when viewed from the front) positive (+) wire to RIGHT +.

[b]Connect the right speaker negative (–) wire to RIGHT –.

[c]Connect the left speaker negative (–) wire to LEFT–.

[d]Connect the left speaker positive (+) wire to LEFT+.

10