remote coNtroller
vz
Using this remote controller, you can control this unit and Marantz CD players, DVD players, tuners, tape decks etc. that have a remote control receptor. The operations possible by remote controller may differ with each component; therefore see the instruction manual that came with the component.
The remote controller buttons are laid out as shown below.
xInput selector buttons
Input source Button
These buttons are for directly selecting the input source.
Caution:
Some input jacks of this unit and the corresponding input selector buttons on the remote controller differ, as shown below.
ENGLISH
Names aNd FuNctioNs
vSOURCE DIRECT button
This button is for switching Source Direct mode ON or OFF.
bComponent operating buttons
These buttons are for performing basic operations of a Marantz CD player, DVD player, etc. The function of each button changes to match the component selected as the input source using the
Basic Names aNd coNNectioNs FuNctioNs
|
|
|
|
|
|
| x | z POWER ON/STANDBY buttons |
|
|
|
|
|
|
|
| POWER ON button |
|
|
|
|
|
|
|
| Turns the unit power on when it is in the standby |
|
|
|
|
|
|
|
| mode. |
|
|
|
|
|
|
| b | POWER OFF button |
|
|
|
|
|
|
|
| Sets the unit power to the standby mode when it is |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| set to the |
|
|
|
|
|
|
| c | SOURCE POWER button |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
x |
|
|
|
|
|
| Switching the mode of a CD player, DVD player or | |
|
|
|
|
| ||||
|
|
|
|
|
|
|
| other Marantz component equipped with a power |
|
|
|
|
|
|
|
| standby function between |
|
|
|
|
|
|
|
| is enabled by pressing this button after the INPUT |
|
|
|
|
|
|
|
| SOURCE button corresponding to the component |
|
|
|
|
|
|
|
| has been pressed. |
|
|
|
|
|
|
|
| When this button is pressed after pressing the |
|
|
|
|
|
|
|
| TUNER button, the tuner’s power is turned on; |
|
|
|
|
|
|
|
| when it is pressed again, the tuner is set to the |
|
|
|
|
|
|
|
| standby mode. |
|
|
|
|
|
|
|
| When this button is pressed after pressing the AMP |
|
|
|
|
|
|
|
| button, the unit is switched from the |
b |
|
|
|
|
| mode to the standby mode or vice versa. | ||
|
|
|
|
| * The remote controller cannot be used to turn the | |||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| primary power of the amplifier ON and OFF. |
The unit | Buttons on the | |
remote controller | ||
| ||
AUX/DVD | AUX, DVD | |
RECORDER2 | TAPE, MD |
For the input sources shown in the table above, although the same jacks are used for two types of sources on the unit, separate buttons are provided on the remote controller.
When using the remote controller for operation of a Marantz component connected to the unit, select the input source first, then perform operations.
INPUT 3 Button
This button is for
The input source indication, which is displayed on the function indicator on the main frame, is fed to the right.
INPUT 4 Button
This button is for
The input source indication, which is displayed on the function indicator on the main frame, is fed to the left.
cVOLUME adjustment buttons
MUTE Button
This button activates the mute function. Pressing this button again releases the MUTE function.
The MUTE function can also be released by pressing either the VOLUME + or – buttons.
VOLUME + Button
This button increases the volume level.
VOLUME – Button
This button decreases the volume level.
input selector buttons. For details, see page 12.
remote coNtroller adVaNced Basic others trouBleshootiNg operatioN coNNectioNs operatioN
5