Marantz PMD351 manual CD Player Operation, Tape REWIND/FAST Forward, Tape Record, CD Playback

TAPE REWIND/FAST FORWARD

Regardless of the direction that the tape transport is

currently in, pressing the (Fast Forward) control

button will place the tape transport in the high speed fast forward mode and the tape will advance quickly

from left to right. Pressing the (Rewind) control

button will place the tape transport in the high speed rewind mode and the tape will retract quickly from right to left. In either the fast forward or the rewind mode, the tape transport will continue to fast forward or rewind until the stop control button is pressed or the end of the tape is reached.

Note:

Automatic search operations cannot operate on the Tape and CD at the same time.

TAPE RECORD

1.Open the cassette holder by pressing the EJECT button. Load a recordable cassette tape into the cassette holder and close. The indicator on the

play control button will begin to flash. (If you wish to change the tape direction, press the play control button and then press the stop control button).

2.Set the DOLBY NR switch to the position that you want to record the tapes' noise reduction in (i.e. tapes to be recorded with Dolby B noise reduction need to have this switch in the Dolby B position, tapes to be recorded with Dolby C noise reduction need to have this switch in the Dolby C position, and tapes to be recorded without Dolby Noise Reduction need to have this control set to the Off position). When recording FM broadcast with Dolby Noise reduction on, set the MPX FILTER switch (on the back of the unit) to the On position.

3.Set the REVERSE MODE switch to the desired position.

4.Set the ALC control to the desired position, on or off.

5.Press the REC/PAUSE button. The REC indicator will begin to flash indicating the tape transport is in the record pause mode.

6.If the ALC control is in the Off position, use the MANUAL RECORD LEVEL control to adjust the input signal to the desired recording level.

7.Press the FORWARD PLAY button to begin recording in the forward direction. Press the

REVERSE PLAY button to begin recording in

the reverse direction. When the tape enters into the playback mode the REC indicator and the play control button indicator will change from the flashing mode to the constant on mode. This indicates the tape transport is in the record mode.

8.To pause the tape transport during recording, press the REC/PAUSE button. Press the play control button ( or )to resume recording.

9.Pressing the STOP button will stop the tape transport during recording. Pressing the rewind button in the play/record direction or

the fast forward button in the play/record direction will cause the unit to return to the position at which recording began.

CD PLAYER OPERATION

CD PLAYBACK

1.Open the compact disc tray by pressing the STOP/

EJECT button . Load a compact disc onto the compact disc tray and close the tray by gently pushing the front of the compact disc tray or by

pressing the STOP/EJECT button . The CD player display will show the general data of the current CD.

2.To begin playback of the compact disc, press the

PLAY/PAUSE button . The indicator in the PLAY/PAUSE button will illuminate. The display will show the data for the first track and the track will begin to play.

3.To pause the CD during playback, press the PLAY/ PAUSE button . The display will remain in the

current position and the indicator in the PLAY/ PAUSE button will begin to flash. Pressing the

PLAY/PAUSE button will resume normal playback from the point that the CD player was paused.

4.Upon completion of playback of the last track in the disc, the CD Player will return to the stop mode. You can also stop the CD playback by

pressing the STOP/EJECT button once.

Pressing the STOP/EJECT button again will cause the CD tray to open.

ENGLISH

- 13 -