REMOTE CONTROL
USING THE REMOTE CONTROL UNIT
1. Remote control
Operate the remote control unit (RC455SD) within a distance of approx. 5 m from the infrared signal reception window (remote sensor) on the front of the CASSETTE DECK.
z
x c
v b
ADECK B
REC
RESET
REC MUTE
n m
,
.
⁄0
Remote control operation may not be possible if the remote control unit's transmitter is not pointing in the direction of the remote sensor or if there is an obstruction between the transmitter and the remote sensor.
Remote control operating range
Approx. 5m
RC455SD
zA/B button Mechanism select buttons (DECK A/B):
Press to select the deck mechanism, Deck A or Deck B, to be controlled.
x
(REC PAUSE) button:
Press this button to enter the recording pause mode from the recording or recording mute mode. This button can only be used during recording. See page 5.
c
REC button:
Press the REC button, the deck enters the Recording Pause mode. See page 5.
v
(Play button):
Press to playback tape.
b
(Fast rewind button):
Press for fast rewind.
nRESET button:
Press to tape counter reset.
mREC MUTE button:
Press the REC MUTE button, the Recording Pause mode will start Auto Rec Mute, and a
,
(DIRECTION) button:
After starting playback, press the forward ( 
) or reverse ( 
) to select the top playback direction.
.
(Fast forward button):
Press for fast forwarding.
⁄0
(STOP) button:
Press to cancel any operation modes and stop the tape travel of the deck.
60˚
Cassette deck
Remote control unit
2. Loading batteries
Batteries in this remote control unit have a life of approximately 1 year under normal operating conditions. When the remote control unit is not to be used for an extended period of time, remove the batteries. Also, when you notice that the batteries are starting to run down, replace them as soon as possible.
(1) Remove the battery cover.
Remote control unit Rear side
(2) Insert the batteries with correct / orientation.
Two
(3) Close the battery cover until it clicks shut.
ESPAÑOL FRANÇAIS ENGLISH
9
