Auto Track

Copy Segment

With the Auto Track (Automatic Track incrementing) On, a new audio file is begun automatically at specified intervals of recording time. The Auto Track can be set to increment every 1, 5, 10, 15 or 30 minutes, or every 1, 2, 6, 8, 12 or 24 hours. The Auto Track makes finding a particular point in a recording easier. For example, if a new audio file begins every minute during playback, the Auto Track makes finding a particular passage easier because of the relationship between file numbers and time. During playback, you can select file number 3 to play approximately the 3rd minute of recording. To go directly to the beginning of the 10th minute, select file number 10, etc.

 

Recording time

#

minutes : seconds

001

.................................0:00 – 0:59

002

.................................1:00 – 1:59

003

.................................2:00 – 2:59

The continuity of sound is not guaranteed and depends on the speed of a card or the file size.

Setup the “Auto Track” of the preset menu. (☞P.44)

Note:

New audio file starts automatically when the recorded file size reaches 4GB.

Copy Segment physically turns your “highlighted” section into a new and separate file, without destroying the original source file(s).

1. “COPY” is displayed during playback. Press the

(F1: COPY)

button when the audio reaches your desired IN-point.

 

“Set as IN?” is displayed.

2.Press the 3/8/ENTER button to store the IN-point. “IN-” will flash on the display to indicate the IN-point has been stored and playback of the file resumes.

26