EDIT

EDIT button

Press and hold the

MARK EDIT button for about 2 seconds to enter Edit mode.

Edit mode

Edit mode includes: Renumber (renumber tracks), TrkERASE (erase a track), TrkMkERASE (erase an EDL mark), AllMkERASE (erase all EDL marks), FORMAT (format the CF card), and

CARD CHECK.

How to renumber tracks

If you have erased tracks from the CF card it is easier to locate recordings if the tracks are renumbered.

From stop, press and hold the MARK/ EDIT button for about 2 seconds to enter Edit mode.

Renumber is flashing in the display.

While Renumber is flashing (3 seconds) press and release the ENTER button . (Or press and release the STOP button to cancel.)

Renum OK? will be flashing. Press and release the

ENTER button to confirm.

EXECUTING will be displayed, and the

percentage execut-

ing will increase to 100%.

100% done will be displayed momen- tarily. The PMD671 and the

display will return to stop mode.

How to erase tracks

From stop, press and hold the MARK/ EDIT button for about 2 seconds to enter Edit mode.

Renumber is flashing in the display.

While Renumber is flashing (3 seconds) press and release the MARK/ EDIT button again.

TrkERASE is flashing in the display.

While TrkERASE is flashing (3 seconds) press and release the ENTER button .

Track number is flashing in the ERASE display.

Press and release the F.FWD/+ button or the -/F.REV button to select the track number you want to erase.

Example track 34.

While the track to be erased is flashing (3 sec- onds), press and release the ENTER button . (Or press and release the STOP button to cancel.)

EXECUTING will be displayed momen- tarily.

Done will be displayed momentarily.

The PMD671 and the display will return to the first

track so you can choose to erase another track.

The recording time (file space on the CF card) used by the erased track is available for record- ing.

Press and release the STOP button to exit.

- 20 -